VG Series 50 Taper Bridge type Machine with Auto Pallet Changer System (2 APC) this machine has all the power and rigidity you need.

OKK VG Series
Технические характеристики
VG5000
Item | Unit | Specification | |
Travel | Travel on X axis (Saddle: right/left) | mm | 760 (29.92″) |
Travel on Y axis (Table: back/forth) | mm | 900 (35.43″) | |
Travel on Z axis (Spindle head: up/down) | mm | 610 (24.02″) | |
Travel on A axis (Table tilting) | deg | -120 to 30 | |
Travel on C axis (Table turning) | deg | 360 | |
Distance from table top surface to spindle nose | mm | 140 – 750 (5.51″-29.53″) | |
Table | Table (Pallet) work surface area (X-axis direction x Y-axis direction) | mm | 500 (19.69″) and 500 (19.69″) |
Max. workpiece weight loadable on table (pallet) | kg | 600 (1323 lbs) (for indexing) | |
Table (Pallet) work surface configuration (nominal screw-hole size X number of holes) | M16 X 24 holes | ||
Distance to the table work surface from the floor | mm | 1280 (50.39″) | |
Pallet exchange time | sec | 16 | |
Spindle | Spindle speed | min’1 | 35 to 12000 |
Number of spindle speed change steps | Stepless (electrical 2 steps) | ||
Spindle nose (nominal number) | 7/24 taper, No. 50 | ||
Spindle bearing bore diameter | mm | Ф100(Ф3.94″) | |
Feed Rate | „ … X, Y and Z axes: | m/min | 24 (945 ipm) |
A and C axes | min_1 | A: 20 C: 30 | |
Puttinn fepri ratp L X‘ Y and Z axes: | mm/min | 1 to 24000 (0.04 to 945 ipm) *1 | |
A and C axes | min_1 | A: 20 C: 30 | |
Automatic Tool Changer | Tool shank (nominal number) | JIS B6339 BT50 | |
Pull stud (nominal number) | OKK only 90° | ||
Number of stored tools | tools | 40*г | |
Maximum tool diameter (with adjacent tools) | mm | 0115(04.53″) | |
Maximum tool diameter (without adjacent tools) | mm | 0230 (09.06″) | |
Maximum tool length (from the gauge line) | mm | 400 (15.75″) | |
Maximum tool weight | kg | 20 (44 lbs) | |
Tool selection method | Address fixed method | ||
Tool exchange time (tool-to-tool) | sec | 4.5 | |
Tool exchange time (cut-to-cut) | sec | 10 | |
Motors | For spindle (25%ED/30-min rating/continuous rating) | kW | 45/30/26 (61/41/35 HP) |
„ . . X, Y and Z axes | kW | FANUC: 5.5 X 5.5 X 5.5 (7 X 7 X 7 HP) | |
A and C axes | kW | FANUC: 5.5 X 5.5 (7X7 HP) | |
Required Power Supply | Power supply | kVA | FANUC: 64 |
Supply voltage x supply frequency | VXHz | 200±10% X 50/60±1 220±10% X 60±1*3 | |
Compressed air supply pressure | MPa | 0.4 to 0.6 (58 to 87 psi)*4 | |
Compressed air supply flow rate | Umin(ANR) | 500(132 gpm)*5 | |
Tank Capacity | Coolant tank | L | 380 (100 gal) |
Spindle head cooling oil tank | L | 72 (19 gal) | |
Hydraulic unit tank | L | 20 (5 gal) | |
Machine Size and Required Floor Space | Machine height from the floor surface | mm | 3805 (149.80″) |
Floor space required for operation (width x depth) | mm | 3794 X 4260 (149.37″ X 167.72″) | |
Floor space including maintenance area (width x depth) | mm | 4600 X 5000 (181.10″ X 196.85″) | |
Machine weight | kg | 25000 (55100 lbs) | |
Controller type | F31 i-B5 | ||
Temperature of operation environment | 5 to 40 |